11
10
Operating Instructions - continued
Filling with Coffee
a. Fill the filter with fresh, fine ground espresso
coffee (do not overfill).
b. Tamp and compress the ground coffee firmly
and evenly. Coffee should be 3mm below top
of filter after tamping.
c. Clean any excess coffee from the rim to
ensure proper fit under brew head and avoid
leaks.
Placing the Porta-Filter
a. Position porta-filter underneath the brew
head.
b. Position handle so that the handle lines up
with the open lock icon “ ” on the unit and
fits into the groove.
c. Then, slowly turn it to the right until the
retention clip is aligned with the closed lock
symbol “ ” on the unit.
Figure 5a
Figure 5b
Figure 5c
Operating Instructions - continued
Placing the Cup(s)
a. Pull out the height adjustment tray if you
are using a small “demitasse” cup to brew
espresso.
b. Keep the height adjustment tray inside its
compartment if you are using a larger cup to
brew cappuccino.
c. Keep the height adjustment tray inside its
compartment if you are brewing into a larger
cup.
Caution: When brewing cappuccino or latte,
make sure to adjust the frothing tube lever to
aim the frothed milk dispensing tube inside
your cup
Turning the Unit on
a. Make sure unit is plugged in.
b. Turn unit on “I”.
The 3 control panel lights will start pulsing
during heating until the brew and steam
heaters reach the perfect temperature. Once
these lights become solid, the unit is ready to
use.
NOTE: It is normal for the Espresso function
to be ready before the Cappuccino and Latte
functions.
NOTE: If you leave your unit on for 15 minutes
without using, your unit will go into sleep
mode. Press any button to reactivate.
Figure 6a
Figure 6b
Figure 6c
Figure 7a
Figure 7b
Figure 7c
Latte
Figure 8a
Figure 8a
