3. When brewing is complete, turn your coffeemaker
off, discard the water in the decanter and rinse
the decanter, decanter lid, and filter basket. Your
coffeemaker is now ready to use. Enjoy it!
SETTING THE CLOCK AND DELAY BREW TIME
To Set the Clock:
1. Plug the power cord into a standard
electrical outlet. The clock will flash on
the control panel to indicate that the
time has not been set yet.
2. Press and hold the HOUR and MINUTE
buttons until you reach the current time.
The AM or PM indicator will light at the
top of the display (Figures 1 and 2). The
clock is now set!
NOTE:
Pressing any button before setting the
clock will cause the clock to start keeping time
from 12:00 a.m. You must set the clock if you
want to use the Delay Brew feature.
To Set the Delay Brew Time:
While the display is in the clock mode,
simply press the SET DELAY button (Figure 3)
and, while the DELAY BREW time is flashing,
set the brew time by pressing the HOUR
and MINUTE buttons. The AM or PM
indicator will light at the top of the clock
display. (Figure 4) Within a few seconds the
display will change to the current time. The
Delay Brew Time is now set!
10
11
•
Programmable Controls:
–
Clock
– The clock serves as a handy kitchen clock
and allows you to set the Delay Brew feature and
functions as the FRESH BREW™ TIMER feature.
–
Fresh Brew™ Timer feature
– Lets you know how
long your coffee has been waiting for you.
–
Delay Brew
– Would you like to wake up to a
fresh pot of coffee? The timer allows you to
preset when you would like the coffeemaker to
automatically begin brewing your coffee, up to 24
hours in advance.
–
NOTE:
If you have selected any of the operating
functions, the coffeemaker will act upon the last
operation selected if the power is restored within
10 seconds after a power outage.
CLEAN YOUR COFFEEMAKER BEFORE USING THE
FIRST TIME
Make sure your first cup of coffee is as good as can be
by cleaning your SUNBEAM
®
Coffeemaker before its first
use. Just follow these simple steps:
1. Wash the decanter, decanter
lid and the filter basket in a
mixture of mild detergent and
water. Rinse each thoroughly
(please refer to the parts
diagram listed above).
2. Replace all the parts and close the lid. Then, run a
brew cycle with water only, without adding coffee
and coffee filter.
Figure 1
Figure 2
Figure 3
BVSBSJX36-033_13EFM1.indd 11-12
6/26/13 1:52 PM
