Conical Burrs are used to grind coffee beans
to a suitable size for espresso extraction.
Deposits of grinds & oils build up over
time, affecting the taste of the espresso &
operation of the integrated Grinder.
Cleaning Grinding Cradle & Grind Outlet
• Weekly
Remove any coffee grinds from the Grinding
Cradle & Grind Outlet with the Cleaning
Brush and wipe with a damp cloth, wipe dry.
Cleaning the Bean Hopper
• 2-3 Months
If the Grinder is used frequently (everyday),
the Bean Hopper needs to be cleaned to
ensure best performance.
• Preparing to Clean Bean Hopper
-
Turn off the machine, switch off & unplug
at power outlet.
-
Make note of the current Grind Setting
(to use as the starting point after cleaning).
• Remove and Clean Bean Hopper
-
Turn Bean Hopper fully anti-clockwise,
to close the Hopper Gates and unlock the
Bean Hopper.
-
Remove the Bean Hopper from the
Grinder Collar and store any remaining
beans in an airtight container to preserve
their freshness.
- Wash the Bean Hopper in warm soapy
water, then rinse & dry. Let the Bean
Hopper stand to allow thorough air drying
before replacing.
• Replace Bean Hopper
-
Ensure the Grinder Collar is clear of
coffee beans or grinds.
-
Ensure the Hopper Guide is aligned with
the vertical white lines on the Hopper base.
-
Align & insert the Bean Hopper into the
Grinder Collar and firmly pushing down
turn clockwise to lock into place and
open the Hopper Guide.
-
Reset to the Grind Setting noted prior
to cleaning.
27
Care & Cleaning - Grinder
GRINDER
OUTLET
WARNING:
Do not immerse the machine
in water.
CAUTION:
To prevent damage to the
appliance do not use alkaline cleaning
agents, abrasives or metal scourers.
Note:
Coffee grinds caught under the Top
Burr may prevent the Bean Hopper from
seating correctly. If this happens grind off
excess coffee beans, see page 28.
Note:
After cleaning, the optimum
Grind Setting may have changed. To
find the optimum Grind Setting use the
information on pages 14-15.
1.TURN
AIR TIGHT
CONTAINER
2.REMOVE
CLEAR OF
COFFEE BEANS
& GRINDS
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
2.TURN
HOPPER
GUIDE
