Sunbeam AutoGrinder EM0420, Instruction Booklet

Page: 7 / 12

5
Before using your Sunbeam AutoGrinder
II, wipe the grinding bowl and blades
clean with a damp cloth and wash the
transparent cover in warm soapy water. Dry
thoroughly.
Note: Allow to dry completely before using.
1. Place the AutoGrinder on a dry, level
surface.
2. Remove the cover of the AutoGrinder II by
turning it to the right/unlock position, then
lift straight up.
3. Using the measurements on the cover,
fill with the desired amount of coffee
beans and pour into the grinding bowl.
Alternatively scoop the beans directly into
grinding bowl.
4. Replace and lock the cover onto the
AutoGrinder II. Align the arrow on the lid/
cover with the ‘unlock’ graphic, on the rear
of the grinder, and turn the cover to the
left/lock position.
5. Plug the power cord into a 230-240V AC
power outlet and turn the power ‘ON’.
6. Rotate the grind selector to the required
grind setting.
Set the cup selector to the number of cups
to be ground.
7. Press the ‘Grind’ button to commence
grinding and then remove finger. The
Sunbeam AutoGrinder II will stop
automatically when the selected grind
is achieved. To stop the grind cycle at
anytime, push the ‘Grind’ button. When the
‘Grind’ button is pressed again, the grinder
will start from the beginning of the timed
cycle.
Important: Do not remove the cover before
the blades have stopped moving.
Using your Sunbeam AutoGrinder II