Our 3-Way Safety System ensures that your
kettle will:
1. Automatically switch off after boiling.
For convenience, safety and energy
efficiency, your Sunbeam kettle will
automatically switch off after boiling.
2. Cut-out for boil-dry protection.
If the kettle is operated without water, it
will automatically cut-out, preventing any
damage to the element.
If this occurs, allow the kettle to cool
before filling with cold water and
re-boiling.
3. Shut-down in case of overheating.
In the event of overheating, the kettle will
automatically shut down to prevent further
damage. Should this occur, take your kettle
to a Sunbeam Service Centre or Appointed
Service Agent.
Sunbeam’s 3-Way
Safety System
LOWER TEMPERATURE
SELECT MODE
ENERGY SAVING HINTS AND
TIPS
IF THE KETTLE BOILS DRY
SUGGESTED WATER
TEMPERATURES
ERROR ALERT
MUTE FUNCTION
You can even set a temperature that is lower
than the current temperature while the kettle
is cooling, and the kettle will let you know
when it is ready! For example, if the kettle has
boiled and is indicating 100°C you can press
(for example) 90°C and its light will be
permanently on. When the water has cooled to
90°C your kettle will play a short tune and the
illumination will flash to indicate the water is
ready.
A Sunbeam
®
kettle, if used correctly, is a very
energy efficient device. Why not try some of
these energy saving tips:
Only boil the water you need. Overfilling your
kettle by one cup is the equivalent to using an
energy saving light bulb for one hour!
It is not always necessary to reboil your kettle.
For example, one litre of water will still be at
90°C after five minutes - the perfect
temperature for a cup of oolong tea.
Only heat the water to the temperature
required for your chosen beverage.
If the kettle is operated with insufficient water
a built-in fail-safe device will automatically
switch it off.
Unplug your kettle and allow it to cool. When
it has cooled down sufficiently the safety
device will reset itself.
If the kettle jug is removed from the base and you attempt to use the base unit, the kettle will
sound an error tone and the base unit lights will pulse 3 times. To use the kettle place the jug
back onto the base.
This function allows you to mute all sounds.
The mute function can be activated by holding down the stop button for 3 seconds. There will
be a sound after 3 seconds to confirm the mute setting has been activated.
To deactivate the mute function, hold the stop button for 3 seconds. There will be a sound to
confirm the mute setting has been deactivated.
Beverage
Recommended Temperature
Green Tea
80°C
White Tea
85°C
Oolong Tea
90°C
Black Tea
90°C-100°C
Herbal Teas
90°C-100°C
Instant Coffee
95°C
Hot Chocolate
90°C-100°C
4
5
