Display mark
Condition/Cause
Corrective action
Mark
in the
Measurement in progress
surement condition and
remain quiet.
Measurement in
flashes when pulse is
progress
detected.
Mark flashes when power is
Automatic exhaust is
applied and there is air
formed.
remaining in the cuff.
Exhaust
-
-
A
Measurement has begun
Raise
but the pressure was
pressure 30-40
Insufficient
insufficient.
more and measure once
pressure
again.
Replace
batteries
Appears when the battery
Replace all four batteries
voltage is excessively tow.
with new ones.
error
Pulse
error
Appears when the blood
pressure could not be
obtained accurately.
Appears when the pulse
rate could not be obtained
accurately.
Exhaust the air from the
cuff, and re-apply the cuff
properly and re-measure.
(Wait
minutes before
re-measure)
