background image

DATE: May 16, 2016
ITEM/SKU #: 15951 / 689456
DESCRIPTION: 

3pk 9 LED Power Failure / NL

CUSTOMER/RETAILER: COSTCO USA
DESIGNER: AP/sw/LP/AP

LI-313485

INSTRUCTION SHEET

BLACK

DIMENSION

HEIGHT (FRONT): 6.25in
HEIGHT (BACK):
LENGTH (FRONT): 10in
WIDTH (SIDES):  

P:

DPM:

CM:

MM:

AM:

AC:

GS:

PM:

JOANNE LEBLANC

SAVE THESE INSTRUCTIONS

MODEL # 30310512 

ITM. / ART. 689456

Battery type: Built-in rechargeable 3.6V 500 mAh Ni-MH battery
Charging time: Minimum 10 hours
Runtime for power failure light: 390 minutes
Rating: 120VAC, 60Hz, max 1.8W

Type de pile : Pile Ni-MH rechargeable intégrée, 3,6 V 500 mAh
Durée de charge : 10 heures minimum
Autonomie de la lampe d’urgence : 390 minutes
Caractéristiques : 120 VAC, 60 Hz, 1,8 W maximum 

MOTION SENSOR SWITCH SETTINGS: 

Motion Sensor ON mode

  

Blue night light will turn on for 25 seconds.  

If no motion is detected, unit will turn off.

Motion Sensor OFF mode

 

Blue night light will turn on for 25 seconds.  

If no motion is detected, unit will automatically  

dim. If motion is detected, unit will return to  

full brightness. Night light will remain lit until  

ambient light is detected.

           On / Off button

When the unit is not charging,

 press the button 

once to turn on the LED on the front panel, press  

the button twice to switch light source from front 

panel LED to flashlight and press the button again  

to turn the unit off.

CAUTION:

 Risk of electric shock and fire hazard. This product is

not a toy and is not intended for use by children. For adult use only. 

Do not plug in extension cords. Indoor use only. For safe use, plug 

only into exposed wall outlets where night light is ventilated and 

cannot contact bed coverings or other material that may present 

a fire hazard.

Plug the LED power failure light into a wall  

socket (upright [FIG. 1] or downfacing [FIG. 2]). 
Charge for 24 hours before first use. 
Complete charging time is 10 hours. 

FIG. 1

FIG. 2

SPECIFICATIONS

CARACTÉRISTIQUES

HOW TO CHARGE

OPERATION

PARTS AND FUNCTIONS

PIÈCES ET FONCTIONS

To download this instruction manual, 

visit the product page on our website:  

www.limagehomeproducts.com

Distributed by:

Costco Wholesale Corporation

P.O. Box 34535

Seattle, WA 98124-1535

USA

1-800-774-2678

www.costco.com

LIMITED WARRANTY 

This product is guaranteed to operate a minimum of 1 year from the original date of purchase. 

If, under normal use and for the full time period, your product fails to operate, please return it to: Quality Control Dept., 

L’Image Home Products, Inc., 1175 Place du Frère-André, Montreal, Quebec, Canada H3B 3X9 (with your original proof 

of purchase receipt) and we will refund it. This warranty is considered void if the product fails from misuse.

© 2016 Sunbeam Products, Inc. 

doing business as Jarden  

Consumer Solutions. All rights 

reserved. SUNBEAM

TM

 logo is  

a trademark of Sunbeam  

Products, Inc. used under license.  

Distributed by L’Image Home  

Products Inc., Montreal, Canada   

H3B 3X9.  HP1028-072216

If you have any problems, please do not contact the store. Contact our customer service  

at 1-877-383-6399 

(8:30 am - 5:30 pm E.S.T.)

 Monday - Friday 

or contact us at  

www.limagehomeproducts.com. Our customer service will be happy to assist you.

Foldable plug

MO

TION SENSOR

ON

OFF

On / Off button

Motion sensor 

switch

Motion sensor 

Blue for night light / white 

for power failure light

1 DEL blanche  

pour lampe de poche /
Détecteurs de luminosité

Prise pliable

Bouton On / Off 

(Marche / Arrêt)

Interrupteur du détecteur  

de mouvement

Détecteur de  

mouvement 

DEL bleue pour  

la veilleuse / 

DEL blanche pour  

la lumière d’urgence 

Power Failure Light

  

White LED automatically turns on when power 

goes off.

Automatic Night Light with Photo Sensor

  

Blue LED turns on with lack of ambient light.  

Turns off when room is lit.

Auto Dimming

  

Under night light mode, unit auto adjusts to a 

lower brightness if no motion is detected by 

motion sensor for 25 seconds. 

Motion Sensor Night Light

  

Blue LED automatically on when sensors detect 

a lack of ambient light and motion; automatically 

off when motion stops or with an increase in 

ambient light. 

Rechargeable LED Flashlight 

Lumière d’urgence

  

La DEL blanche s’allume automatiquement  

en cas d’interruption de l’alimentation électrique

Veilleuse automatique avec  

détecteur de luminosité 

  

La DEL bleue s’allume en cas de diminution  

de la lumière ambiante. Elle s’éteint lorsque  

la pièce est éclairée.

Réglage automatique de l’intensité 

 

En mode veilleuse, l’appareil réduit  

automatiquement sa luminosité lorsqu’aucun  

mouvement n’est détecté pendant 25 secondes. 

Veilleuse avec détecteur de mouvement 

  

La DEL bleue s’allume automatiquement  

lorsque les détecteurs captent une diminution  

de lumière ambiante ou un mouvement.  

Elle s’éteint automatiquement en l’absence  

de mouvement ou en cas d’augmentation  

de la lumière ambiante.

Lampe de poche à DEL rechargeable

N

o

 DE MODÈLE 30310512 

ITM. / ART. 689456

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

Thank you for purchasing this Sunbeam

TM

 LED Power Failure / Night Light. 

Please read all instructions before using your new Power Failure / Night Light.

IMPORTANT:

 

FOR INDOOR AND DRY LOCATION USE ONLY.

IMPORTANT, À CONSERVER POUR CONSULTATION ULTÉRIEURE : À LIRE ATTENTIVEMENT.
Merci d’avoir acheté cette lampe d’urgence / veilleuse à DEL Sunbeam

MC

Veuillez lire toutes les instructions avant d’utiliser votre nouvelle lampe d’urgence / veilleuse.

IMPORTANT :

  

POUR UTILISATION À L’INTÉRIEUR ET DANS DES ENDROITS  

SECS SEULEMENT

MADE IN CHINA /  

FABRIQUÉ EN CHINE / HECHO EN CHINA

Brancher la lampe d’urgence à DEL  

dans une prise murale (avec le boîtier  

vers le haut [FIG. 1] ou vers le bas [FIG. 2]). 
Laisser recharger pendant 24 heures  

avant la première utilisation. 
La durée de charge complète est de 10 heures. 

FIG. 1

FIG. 2

RECHARGE

IMPORTANT SAFETY INSTRUCTIONS

This device complies with Part 15 of the FCC Rules and 

Industry Canada ICES-003 standard. Operation is subject 

to the following two conditions: (1) this device may not 

cause harmful interference, and (2) this device must 

accept any interference received, including interference 

that may cause undesired operation.

WARNING: 

Changes or modifications to this unit 

not expressly approved by the party responsible for 

compliance could void the user’s authority to operate 

the equipment.

NOTE:

 This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are 

designed to provide reasonable protection against  

harmful interference in a residential installation. This 

equipment generates, uses and can radiate radio 

frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there  

is no guarantee that interference will not occur in a  

particular installation. If this equipment does cause 

harmful interference to radio or television reception, 

which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment 

and receiver.

- Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio / TV 

technician for help. 

ON

OFF

1 white LED  

for flashlight /
Photo sensors

MO

TION SENSOR

ON

OFF

5

4

Reviews: