12
13
SYMBOLS / SYMPTOMS
CONDITIONS / CAUSES
INDICATION / CORRECTION
Unit does not turn
on when
START / STOP
button is pushed.
Worn-out batteries.
Replace them with 4 new AAA
(LR03) alkaline batteries.
Battery polarities have been positioned
incorrectly.
Re-insert the batteries in the correct
positions.
Measuring Error Symbol
appears when blood
pressure value displayed
is excessively low or high.
Cuff has been placed incorrectly.
Wrap the cu properly so that it is
positioned correctly.
Measuring
Error Symbol
Air circuit abnormality. Cuff tube may
not be plugged into monitor correctly.
Check cuff connection.
Measure again.
Measuring
Error Symbol
Ination pressure exceeding 300mmHg. Switch the unit o, then measure
again.
Measuring
Error Symbol
Can’t determine blood pressure
measurement data.
Wrap the cuff properly and keep
steady. Measure again.
Cuff is worn improperly, or the shape of
the upper arm is unusual (for example,
the circumference of the upper arm
diers largely from the circumference of
the forearm), excessive gap might exist
between the arm cuff and the arm.
Wrap the cuff snugly so that it is
positioned correctly. If you have any
question about the cuff wearing
and/or measurement result,
please consult your healthcare
professional.
Excessive Body Motion
Detector
Notice:
The measured blood
pressure reading may not
be accurate if the icon is
displayed.
Body movement during measurement,
especially, the movement on the arm
the blood pressure monitor is worn
on. e.g. Talking, moving or shaking
of the arm with the cuff on while
measurement.
Measure again. Keep arm steady
during measurement.
Cu is worn improperly, or the shape of
the upper arm is unusual (for example,
the circumference of the upper arm
diers largely from the circumference of
the forearm), excessive gap might be
exist between the arm cuff and the arm.
Wrap the cuff properly and keep
steady. Measure again. If you have
any question about the cuff wearing
and/or measurement result,
please consult your healthcare
professional.
Cuff Fitness
detection Symbol
The cuff was wrapped incorrectly (for
example too loosely or too tightly).
Please reference “applying the Cuff“
section to wrap the cuff correctly
Note:
If "EP" appears on the display, just return the device to your local distributor or importer.
RECALLING DATA
1. Press
+
button to select User 1 or 2.
2. Press
M
button to enter Memory Mode.
• If there is no data stored, nothing (except month, date, and time)
will appear on the display.
• If there is data stored, the first reading will show the average of the
last three (3) records in memory.
3. Press
M
to read the preceding measurements in sequence.
4. When finished, press
START / STOP
(the device will enter Standby Mode).
ERASING DATA
1. Press
+
button to select User 1 or 2.
2. Press
M
button to enter Memory Mode.
3. Press and hold
M
and
+
buttons at the same time. All data for the
selected user will be erased automatically.
Note:
Once deleted, your data
CAN NOT
be restored.
CLEANING AND DISINFECTION
• Clean the device with only a soft, damp cloth. Wipe dry.
• Never immerse the device or cuff in water or other liquid.
• Do not use detergent or any strong chemicals to clean the device.
• Make sure the cuff is clean and completely dry before use.
• Inspect the device, LCD display and cuff(s) before and after each use. Discard immediately if
signs of blood, soil or stains exist.
• For at-home use by one user: Clean and disinfect the device and cuff(s) at least once a
month with a commercially available 75% alcohol wipe for a minimum of 30 seconds.
• For at-home use by multiple users, clean and disinfect between each user and at least once
weekly.
STORAGE
• Remove the batteries if storing or not using for an extended period.
• Make sure the device is clean and dry before storage.
• Always store and transport the device in its protective case.
• Avoid dropping, intense shaking or other impact.
• Store the device away from direct sunlight, dust, humidity, and temperature extremes.
LIMITED WARRANTY
This product has a limited warranty of 3 year(s) on the blood pressure monitor, 2 year warranty
on the cuff and accessories (except batteries) from the original date of purchase against
workmanship and defects in material. If under normal use, your product fails to operate, please
contact our customer service department at [email protected]. A refund or replacement will
be provided to you with proof of purchase. Star Elite Inc. may deny claims of damage caused by
misuse or modifications of this product.
TROUBLE SHOOTING
