Setup and Operation
1-877-387-3639 | Page 3
WARNING:
Read the entire instructions before beginning and follow the steps outlined. Failure to follow the instructions may
decrease the lifespan of the rechargeable battery and may result in poor performance.
1. Charging the Solar Audio Table
(I) Plug in the Solar Audio Table with the 10V/1A DC adaptor and wall plug included.
(II) The red LED will turn ON during charging and will turn OFF after charging is complete.
(III) Unplug DC charger after charging is complete.
Note: The battery will charge without using the wall plug when the solar panel is exposed to sunlight.
2. How to Use the Remote Control
3. Getting Started
(I) Press and hold the power on/off button for 3 seconds on the remote control.
(I)
Power On/Off:
Press to turn on or off.
(II)
LED Light On/Off:
Press to turn light on or off.
(III)
Next Track:
Press quickly to go to the next track.
Volume Up:
Press and hold to increase the volume.
(IV)
Previous Track:
Press quickly to go to the previous track.
Volume Down:
Press and hold to decrease the volume.
(V)
Play/Pause:
Press to play or pause the track.
Bluetooth
®
Enabled: Press and hold to start the pairing process.