3
Sunbank Installation Manual
Table of Contents
1. Included Parts
………………………………………………………………………………………
4
2. Not Included Parts
………………………………………………………………………………………
5
3. Project Overview
………………………………………………………………………………………
6
4. Plumbing Diagram
………………………………………………………………………………………
7
5. Bracket Diagram
………………………………………………………………………………………
9
6. Reinforce Roof
………………………………………………………………………………………
13
7. Strapping the Tank
……………………………………………………………………………………
..
13
8. Roof Penetration
……………………………………………………………………………………
..
13
9. Roof Attachments
………………………………………………………………………………………
14
10. Insulation and Jacketing
………………………………………………………………………………………
15
11. Filling the Tank
………………………………………………………………………………………
15
12. Tank Diagram
………………………………………………………………………………………
15
13. Tube Installation
………………………………………………………………………………………
16
14. Controller
……………………………………………………………………………………
..
17
15. Temp Sensor/Aux Heater
………………………………………………………………………………………
17
16. Project Completion
………………………………………………………………………………………
17
17. Plumbing Labels
………………………………………………………………………………………
18
18. O&M (Painting the tubes)
………………………………………………………………………………………
19
19. Warranty
………………………………………………………………………………………
21
20. SRCC Information
………………………………………………………………………………………
21
Notice:
The solar energy system described by this manual, when properly installed and maintained, meets the
minimum standards established by the SRCC. This certification does not imply endorsement or
warranty of this product by SRCC.
All installations should comply with building, plumbing, mechanical and fire code adopted by the
authority having jurisdiction or, in the absence of such codes, with the
International Building Code
,
International Plumbing Code
,
International Mechanical Code
, and
International Fire Code
.
Sunbank accepts no responsibility for the misuse or improper installation of this product. This manual
is illustrative, not comprehensive. It does not cover personal safety when working on a roof or go into
depth regarding structural, plumbing, or electrical code. The installer should heed local building code
and industry best practices. The installer should have the proper training and knowledge in these
areas. If you do not have the proper training and knowledge then you should not attempt to install
the Sunbank.