7
107281
OWNER’S MANUAL
For more information, visit www.desatech.com
CAST IRON STOVE
AND B-VENT
BURNER SYSTEM
ASSEMBLY
Continued
Continued
INSTALLING B-VENT
BURNER SYSTEM INTO
STOVE BODY
1.
Carefully lift burner system and place
into stove body from the rear of stove
(see Figure 16).
2.
Place gasket on top of burner system
and align over venting hole (see Fig-
ure 17). (An extra gasket is supplied
with the burner system and should be
kept with the owner’s manual.)
3.
Place 4" connector plate over gasket
and align holes. Secure with hex screws
provided (see Figure 17).
IMPORTANT:
Gasket and connecting plate
must not be installed until after burner sys-
tem has been inserted into stove body.
4.
Place the left and right grate top into
top of stove body. Discard center grate
top and replace with center top grate
provided with burner system.
LO
H
I
P
I
L
O
T
O
F
F
O
N
Burner
System
Cast Iron
Stove Body
Figure 16 - Installing Burner System into Cast Iron Stove Body
Figure 17 - Installing Gasket, Connector Plate, and Top Grates
Burner
System in
Stove Body
Left Top Grate
Center Top Grate
(Included with
Burner System)
Hex Screw
4" Connector Plate
Gasket
Right Top
Grate
