There are two sets of fasteners to join the saunas' corners together. After lowering the Side Wall, check to
ensure that both sets of fasteners have connected by looking at the corner inside of the sauna. It is possible to
connect one set of fasteners and miss the other. If there is an obvious gap in the corner between the two walls
at least one fastener has not connected and the raising and lowering procedure will need to be repeated.
Back Left Corner
Lift the Left Side Wall into position wedging the bottom of the wall into the channel in the floor base.
Back Wall
Cinch the Left Side Wall and the Back Wall together by applying
pressure on the outside of the Left Side wall.
Slide the Left Side wall upward approx. 1/2” while holding the Back
Wall down
The 2 sets of fasteners for the walls will connect when the Side wall is
raised sufficiently.
Slide the Left Side Wall down while continuing to cinch the two walls
together.
Back Wall
S
id
e
W
al
l
Australia - 1800 316 962 | New Zealand 0800 21 8020
