Connect the Back Wall to
Side Wall
Cinch the two walls together
by applying pressure on the
outside of the Side Wall with
the inside of your knee.
Slide the Back Wall up approx. 3/4” while holding
the Side Wall down with your opposite hand.
The 2 sets of fasteners for the walls will connect
when the back wall is raised sufficiently. When
you feel the fasteners connect, slide the Back
Wall back down.
NOTE: It is NOT necessary to lift the entire
Back Wall. Simply slide the Back Wall upward
at the back corner of the sauna to connect to
the Side Wall
It is helpful if a second person applies pressure against the opposite edge of the back wall.
This will helps ensure that the two walls remain in contact and the fasteners will connect.
Australia - 1800 316 962 | New Zealand 0800 21 8020