Connecting the sauna to your house power supply
When the sauna is plugged into you wall outlet the red Power Indicator light on the control
panel will be on.
The Bluetooth audio receiver on the roof will make a beeping noise its indicator light will turn
on.
ON/OFF for Heaters
Push the POWER button to turn the sauna heaters ON. The various displays will come on.
The sauna heaters will remain ON until the timer runs down to 00.
The sauna heaters can be turned OFF at any time by pushing the POWER button.
Timer Adjustment
The default time is 60 minutes. Press + or - to change the Timer setting.
The maximum setting is 60 minutes.
The minimum setting is 5 minutes.
Pre Heat
Sun Stream Infrared Saunas are typically used by preheating the sauna for 20-30 minutes.
Thermostat Adjustment
Press + or - to change the Thermostat setting.
Increase Thermostat Setting: Press the + button to increase the temperature by 1 degree C
increments.
The maximum setting is 65 C.
Decrease Thermostat Setting: Press the - button to decrease the temperature by 1 degree C
increments.
The minimum setting is 25 C.
Australia - 1800 316 962 | New Zealand 0800 21 8020
