Sun Oracle SPARC T4-1B, Installation Manual

Page: 41 / 58

Powering On the Server Module for the First Time 35
2. Connect the dongle cable to the UCP connector on the front panel of the server
module.
If possible, use a three-connector UCP-3 dongle cable rather than a four-connector
UCP-4. See
“Dongle Cables” on page 17 for details.
3. Connect a terminal or terminal emulator to a dongle cable.
■
For a UCP-3 dongle cable, use the RJ-45 connector.
■
For a UCP-4 dongle cable, use the DB-9 serial connector (TTYA). If you need to
make an RJ-45 connection to a UCP-4, do so through a DB-9-to-RJ-45 adapter
attached to the DB-9 connector.
The Oracle ILOM login prompt is displayed on the terminal or terminal emulator.
4. Type the user name and password when prompted.
The default user is
root
. The default password is
changeme
.
You are now logged into Oracle ILOM on the server module SP.
5. At the server module ILOM prompt, type:
The server module initializes.
6. Switch communication to the server module host.
When the Oracle ILOM prompt appears, type:
The server module might take several minutes to complete POST. If a boot device
installed with Oracle Solaris OS is accessible locally, the server module boots.
Otherwise, the server module uses the
boot net
command to seek a boot device
on the network.
You are now connected to the server module host.
7. The server module hardware installation is now complete.
You can now configure the Oracle Solaris OS to meet your needs. See
“Configuring the Oracle Solaris OS” on page 37 .
Related Information
■
“Plan Communication With the Server Module During Installation” on page 15
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS. . .
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type #.