Sun Oracle SPARC T4-1B, Installation Manual

Page: 37 / 58

Powering On the Server Module for the First Time 31
7. At the server module ILOM prompt, type:
The server module initializes.
8. Switch communication to the server module host.
When the ILOM prompt appears, type:
The server module might take several minutes to complete POST. If a boot device
installed with Oracle Solaris OS is accessible locally, the server module boots.
Otherwise, the server module uses the
boot net
command to seek a boot device
on the network.
You are now connected to the server module host.
9. The server module hardware installation is now complete.
You can now configure the Oracle Solaris OS to meet your needs. See
“Configuring the Oracle Solaris OS” on page 37 .
Related Information
■
“Plan Communication With the Server Module During Installation” on page 15
▼
Method 2 – Power On the Host
Through the CMM SER MGT Port
(CLI)
You can access the server module SP by first accessing the chassis CMM ILOM
through a terminal or terminal emulator connected to the RJ-45 serial port on the
chassis. Then you can connect to the server module SP through the CLI of the CMM
ILOM software.
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS. . .
-> start /HOST/console
Are you sure you want to start /HOST/console (y/n)? y
Serial console started. To stop, type #.
...