Sun Microsystems XVR-2500, Installation And User Manual

Page: 51 / 84

31
A P P E N D I X
A
Setting the Default Console Display
These instructions describe how to set the Sun XVR-2500 graphics accelerator as the
default monitor console display.
Note – You can only use the DVI port 1 as the console output. See
FIGURE 5-1
and
Appendix G for the location of DVI port 1.
1. At the
ok
prompt, type:
Information similar to the text below is displayed:
2. Select the graphics board you want to be the default console display.
In the preceding example, b signifies the Sun XVR-2500 graphics accelerator. Your
selection is confirmed by the following output:
ok show-displays
a) /pci@1f,0/SUNW,XVR-100@3
b) /pci@1c,600000/pci@2/SUNW,XVR-2500@0
q) NO SELECTION
Enter Selection, q to quit: b
/pci@1c,600000/pci@2/SUNW,XVR-2500@0 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@1c,600000/pci@2/SUNW,XVR-2500@