Sun Microsystems XVR-1200, Installation And User Manual

Page: 54 / 90

34 Sun XVR-1200 Graphics Accelerator Installation and User’s Guide • July 2004
Setting Up Streaming Methods
When there are two Sun XVR-1200 graphics accelerators in a system, they are
numbered from 0 and by ones (0, 1, 2, 3, ,...)
Setting Up Single Video Output (Default)
This enables the first DVI-I port 1 output only. This is the default the system uses if
no
fbconfig
commands have been given, or after
fbconfig -dev jfb0
-defaults
.
To set up single video output, do the following:
1. If enabled, disable
doublewide
mode.
This disables
doublewide
mode, but maximizes sample density. Use
-defaults
to
get the maximum sample size of 16. Type:
2. Set the desired screen resolution. Type:
To find all possible Sun XVR-1200 graphics accelerator resolutions, type:
host% fbconfig -dev jfb0 -defaults
host% fbconfig -dev jfb0 -res 1280x1024x76
host%
fbconfig -res \?