Sun Microsystems XVR-1200, Installation And User Manual

Page: 47 / 90

Chapter 3 Installing the Sun XVR-1200 Graphics Accelerator Hardware 27
Changing the Monitor Screen Resolution
Note –
The monitor must be connected to the Sun XVR-1200 graphics accelerator
and powered on for it to configure to the initial monitor resolution.
For most installations, the Sun XVR-1200 graphics accelerator device automatically
configures itself to the screen resolution and refresh rate for your monitor. If it is not
a Sun monitor, however, that is connected to the Sun XVR-1200 graphics accelerator
device, the monitor might have the wrong screen resolution. To change the screen
resolution, use the
fbconfig
utilities which is used for configuring all Sun graphics
accelerators.
SUNWjfb_config(1M)
contains Sun XVR-1200 device-specific
configuration information.
● To access the
SUNWjfb_config
man page, type:
# man SUNWjfb_config