3-4
Sun Ultra 2 UltraSPARC-II Module Upgrade • October 1999
FIGURE 3-3
Ultra 2 Processor Slot Locations
■
If your system is equipped with one UltraSPARC-II module, the module must be
installed in slot 0 and a UPA terminator module (501-4843-01) may need to be
installed in slot 1. Refer to the following table.
Note –
The motherboard part number is located on the right front side of the
motherboard. See
FIGURE 3-6
on page 8 to locate the motherboard part number
stamp.
■
If your system is equipped with two UltraSPARC-II modules, slot 0 and slot 1 will
each have a module installed.
TABLE 3-1
UPA Terminator Module Necessity
Motherboard Part
Number
167-MHz
CPU
200-MHz
CPU
250-MHz
CPU
300-MHz
CPU
400-MHz
CPU
501-3132-01
through -08
No
No
No
NS
(Not
supported)
NS
501-3132-09
through -12
No
No
No
Yes
NS
501-3132-13 or later
No
No
No
No
No
Slot 0
Slot 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
