de-22
SunPCi 1.1 Installationshandbuch • September 1999
5. Geben Sie
q
ein, um das Programm
pkgadd
zu beenden.
Hinweis –
Wenn vom Programm
pkgadd
eine Meldung vom Typ
BIOS stimmt
nicht überein
ausgegeben wird, müssen Sie für das BIOS auf Ihrer SunPCi-Karte
eine Flash-Aktualisierung durchführen. Informationen zur Verwendung des
Dienstprogramms
sunpciflash
finden Sie unter ”Aktualisierung des BIOS” auf
6. Geben Sie den Befehl
exit
ein, um die Superuser-Sitzung zu beenden.
Sie wechseln zur Sitzung für reguläre Benutzer.
Aktualisierung des BIOS
Die SunPCi-Software beinhaltet ein Dienstprogramm zur Aktualisierung des BIOS
auf der SunPCi-Karte. Dieses Dienstprogramm namens
sunpciflash
befindet sich
in
/opt/SUNWspci/bin
. Wenn Sie bei der Installation des SunPCi-Packages eine
Warnung vom Typ
BIOS stimmt nicht überein
erhalten, müssen Sie die
Aktualisierung durchführen. Andernfalls ist eine Aktualisierung des BIOS nicht
erforderlich.
Wenn Sie SunPCi starten, wird die Versionsnummer des BIOS auf dem Bildschirm
angezeigt. Beispielsweise wird die Meldung
SunPCi BIOS Version 0.050
angezeigt.
Hinweis –
Vor dem Ausführen des Dienstprogramms
sunpciflash
müssen Sie
SunPCi beenden.
Zur Aktualisierung des BIOS führen Sie folgende Schritte durch:
1. Melden Sie sich als Superuser bei der Workstation an.
2. Geben Sie den folgenden Befehl ein:
Dadurch wechseln Sie in das Verzeichnis, in dem sich
sunpciflash
befindet.
# cd /opt/SUNWspci/bin