Sun Microsystems Sun XVR-200, Installation Manual

Page: 35 / 60

19
C H A P T E R
3
Modifying the
Xservers
File
To configure the Sun XVR-200 graphics accelerator, you must modify your
Xservers
file. This chapter describes how to make that modification.
Configuring the Graphics Device
Through the
Xservers
File
The Sun XVR-200 graphics accelerator device name is
mko0
. To configure the
Xservers
file, do the following:
1. Become superuser and open the
/etc/dt/config/Xservers
file.
If the
/etc/dt/config/Xservers
file does not exist, create the
/etc/dt/config
directory and copy the
Xservers
file from
/usr/dt/config/Xservers
to
/etc/dt/config.
#
cd /etc/dt/config
# vi + Xservers
# mkdir -p /etc/dt/config
# cp /usr/dt/config/Xservers /etc /dt/config
#
cd /etc/dt/config
#
vi + Xservers