Sun Microsystems Sun XVR-200, Installation Manual

Page: 25 / 60

Chapter 2 Installing the Software and Hardware 9
5. Type
y,
and Return, to accept the license agreement.
The following is displayed:
6. Install the Sun XVR-200 graphics accelerator.
(See “Installing the Hardware” on page 11 .)
7. Do a reconfiguration reboot of your system at the
ok
prompt to complete the
installation:
To use the Sun XVR-200 graphics accelerator as a console, type a Solaris prompt:
Installing TSImkox.v TSImkomn TSImkow for Solaris 10 ...
*** Installation of drivers is complete.
To uninstall this software, use the ’uninstall’ script on this CDROM, or
the following script:
/var/tmp/xvr-200.uninstall
A log of this installation can be found at:
/var/tmp/xvr-200.install.2006.03.29
To configure a Sun XVR-200 accelerator, use the fbconfig
utility. See the fbconfig(1m) and TSCmko_config(1m) manual
pages for more details.
*** IMPORTANT NOTE! ***
This system must be rebooted for the new software to take effect.
ok boot -r
# eeprom output-device=screen
# eeprom input-device=keyboard