Sun Microsystems Sun HPC 3.0, Manual

Page: 65 / 67

(Continuation)
# SUNWcluster.sma.smad.1103 - smad: Cluster ‘$clustname’ running
#############################################################################
msgid
‘‘SUNWcluster.sma.smad.1103.message’’
msgstr ‘‘CMM has informed SMAD of the cluster membership. SMAD continues to ‘‘
‘‘monitor the entire cluster. It can also happen if the SMAD was ‘‘
‘‘already in ‘cluster’ mode and had died and restarted.’’
msgid ‘‘SUNWcluster.sma.smad.1103.error’’
msgstr ‘‘Not Available.’’
msgid ‘‘SUNWcluster.sma.smad.1103.fix’’
msgstr ‘‘Not Applicable.’’
#############################################################################
#
SUNWcluster.sma.smad.1104 - smad: Cluster ‘$clustname’ returning
#############################################################################
msgid ‘‘SUNWcluster.sma.smad.1104.message’’
msgstr ‘‘The cluster is entering the ‘return’ transition. SMAD does not ‘‘
‘‘manage the logical adapter in this state, until ‘step1’ (running) ‘‘
‘‘occurs. SMAD will continue to monitor the cluster for physical ‘‘
‘‘failures. It can also happen if the SMAD was already in ‘return’ ‘‘
‘‘mode and had died and restarted.’’
msgid ‘‘SUNWcluster.sma.smad.1104.error’’
msgstr ‘‘Not Available.’’
msgid ‘‘SUNWcluster.sma.smad.1104.fix’’
msgstr ‘‘Not Applicable.’’
#############################################################################
#
SUNWcluster.sma.smad.1105 - smad: Cluster ‘$clustname’ no longer running
#############################################################################
msgid ‘‘SUNWcluster.sma.smad.1105.message’’
msgstr ‘‘This node has left the cluster. CMM has informed SMAD of this. The ‘‘
‘‘cluster is no longer being monitored. It can also happen if the SMAD ‘‘
‘‘had died and restarted.’’
msgid ‘‘SUNWcluster.sma.smad.1105.error’’
msgstr ‘‘Not Available.’’
msgid ‘‘SUNWcluster.sma.smad.1105.fix’’
msgstr ‘‘Not Applicable.’’
#############################################################################
#
SUNWcluster.sma.smad.3104 - SCI Adapter $adp ($from_aid): Session to
# $to_aid not open
#############################################################################
msgid
‘‘SUNWcluster.sma.smad.3104.message’’
msgstr ‘‘The session from adapter ($adp), whose SCI id is $from_aid, to the ‘‘
‘‘SCI adapter with SCI id $to_aid could not be opened.’’
msgid ‘‘SUNWcluster.sma.smad.3104.error’’
msgstr ‘‘It will be opened when possible, later.
msgid ‘‘SUNWcluster.sma.smad.3104.fix’’
msgstr ‘‘Not Applicable.’’
#############################################################################
# SUNWcluster.sma.smak.3001 - SCI Adapter $adp ($from_aid): Session to
# $to_aid active
#############################################################################
msgid ‘‘SUNWcluster.sma.smak.3001.message’’
(continued)
SMA Messages
55