Sun Microsystems Sun Fire B1600 Administration, Installation Manual

Page: 8 / 98

viii Sun Fire B1600 System Chassis Hardware Installation Guide • August 2003
FIGURE 4-3
Ejecting the Blade 4–4
FIGURE 4-4
Removing the Blade 4–5
FIGURE 4-5
Blade Locking Mechanism 4–6
FIGURE 4-6
Aligning and Inserting the Blade 4–7
FIGURE 4-7
Closing the Blade Lever Mechanism 4–8
FIGURE 4-8
PSU Ejector Lever 4–10
FIGURE 4-9
Removing the PSU From the System Chassis 4–11
FIGURE 4-10
Aligning the PSU 4–12
FIGURE 4-11
Sliding the PSU in the System Chassis 4–13
FIGURE 4-12
Closing the PSU Ejector Lever 4–14
FIGURE 4-13
Rear View of the Chassis Showing a Filler Module in Slot SSC1 4–16
FIGURE 4-14
SSC Ejector Lever 4–17
FIGURE 4-15
Removing the SSC From the System Chassis 4–18
FIGURE 4-16
Aligning the SSC Before Insertion 4–19
FIGURE 4-17
Inserting the SSC 4–20
FIGURE 4-18
Closing the SSC Ejector Lever 4–21
FIGURE 5-1
External Cable Ports (One SSC and PSU Shown) 5–2
FIGURE 5-2
Inserting the IEC Power Cords 5–3
FIGURE 5-3
Clipping on the Power Cord Retention Clip 5–4
FIGURE 5-4
The 10/100/1000BASE-T Data Network Ports 5–7
FIGURE 5-5
Attaching the Data Network Cables to the Network Ports 5–9
FIGURE 5-6
10/100BASE-T Network Management Ports 5–10
FIGURE 5-7
Attaching the Network Management Cables 5–11
FIGURE 5-8
Back Cable Management Rings 5–12
FIGURE 6-1
Serial Port Pin Numbers 6–3
FIGURE 6-2
Patch Panel Connections to a Terminal Server 6–4
FIGURE 6-3
Attaching the Serial Cables 6–8
FIGURE 6-4
Connecting the SSC to the Serial Port on a Laptop 6–10