Sun Microsystems Sun Fire 880, Rack Mounting Manual

Page: 36 / 231

en-32 Sun Fire 880 Server Rackmounting Guide • October 2001
■
To prevent bending or pinching of the cables when the tray assembly is fully
extended, be sure that all cables are kept clear of the slides and other obstructions.
■
When connecting the power jumper cords to the server’s power cords, use tie
wraps to secure each connection, as shown below.
Attach the Cable Management Bracket to the
Cabinet
The cable management bracket that attaches to the rear of the cabinet may help to
provide strain relief for the power cord and other server cables. Releasable tie wraps
provided with the rackmounting kit can be used to secure the cables. See “Managing
Cables” on page en-31 for general cable management guidelines.
To attach the cable management bracket to the rear of the cabinet, complete the
following steps:
1. Locate the cable management bracket for the cabinet.
This bracket was provided with the rackmounting kit.