Sun Microsystems Sun Enterprise 450, Product Notes

Page: 30 / 136

en-20 Sun Enterprise 450 Server Product Notes • August 2000
Refer to this illustration when performing the following procedures described in the
Ultra Enterprise 450 Server Owner’s Guide and the corresponding procedures in the
ShowMe How Multimedia application:
■
“How to Remove the Removable Media Backplane”
■
“How to Install the Removable Media Backplane”
■
“How to Remove a CD-ROM Drive or Tape Drive”
■
“How to Install a CD-ROM Drive or Tape Drive”
■
“How to Remove the SCSI Drive Data Cable”
■
“How to Install the SCSI Drive Data Cable”
Note –
There is no adverse effect on system operation or performance if the cable is
installed according to the original instructions in the Ultra Enterprise 450 Server
Owner’s Guide and ShowMe How Multimedia application. However, the cable is easier
to install, and less prone to damage during installation, if you install it as shown in
these Product Notes.
Attaching an Alphanumeric Terminal
The illustration in the Ultra Enterprise 450 Server Owner’s Guide incorrectly identifies
the location of the serial port connector on the server’s back panel. The correct
location is shown below.