Sun Microsystems Sun Enterprise 450, Product Notes

Page: 3 / 136

Declaration of Conformity iii
Declaration of Conformity
Compliance ID: Q36
Product Name: Sun Enterprise 450, Ultra 450 Creator, Ultra 450 Creator3D, and Ultra 450 Elite3D families
EMC
USA – FCC Class A
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
EN55022 / CISPR22 (1985) Class A Integrity Design & Test Services, Inc.
Report Nos: 61419.E2, 61233.E3
Curtis-Straus, LLC. Report No: E990396-1
EN50082-1 IEC801-2 (1991) 8 kV (Direct), 15 kV (Air)
IEC801-3 (1984) 10 V/m, 80% AM at 1KHz
IEC801-4 (1988) 4.0 kV Power Lines, 1 kV Signal Lines
IEC801-5 2 kV Power Lines (L-L, L-G)
1 kV Signal Lines (L-G, Shield-G)
EN61000-3-2/IEC1000-3-2 (1994) Pass
Safety
This equipment complies with the following requirements of the Low Voltage Directive 73/23/EEC:
EC Type Examination Certificates:
EN60950/IEC950 (1993) TUV Rheinland Certificate No: S9771525
EN60950 w/ Nordic Deviations CB Scheme Certificate No: UL1859-113363/USA
Supplementary Information
This product was tested and complies with all the requirements for the CE Mark.
Burt Hemp DATE John Shades DATE
Manager, Power and Compliance Engineering Quality Assurance Manager
Sun Microsystems, Inc. Sun Microsystems Limited
One Network Drive UBUR03-213 Springfield, Linlithgow
Burlington, MA 01803-0903 USA West Lothian, EH49 7LR
Tel: (781) 442-0006 Scotland, United Kingdom
Fax: (781) 442-1673 Tel: 1506 670000
Fax: 1506 672323
June 8, 1999 June 8, 1999