Sun Microsystems Sun Enterprise 4000, Upgrade Manual

Page: 26 / 28

16 Sun Enterprise 4000 System Centerplane Upgrade Guide • January 1999
2. With a wrist strap on, insert a screwdriver in the notch at the top of the SCSI tray
to pull out the tray and separate it from the rear slip connectors.
FIGURE 11
Removing the SCSI Tray
3. Remove the seven screws on top of the SCSI tray to lift off the tray cover and
access the CD-ROM drive.
4. Remove the CD-ROM drive from the SCSI tray:
a. Loosen the three captive screws securing the CD-ROM drive to the SCSI tray.
b. Remove the mounting plate from the CD-ROM drive being replaced and attach
it to the replacement CD-ROM drive.
5. Install the CD-ROM drive:
a. Set the replacement CD-ROM drive SCSI address to 6.
Key Description
1 Screw securing tray cover
2 Captive screw
3 Notch
4 CD-ROM drive
5 Tray cover
1
2
3
4
5