Sun Microsystems Sun Blade X6440 s, Installation Manual

Page: 51 / 68

Chapter 7 Installing a Windows Server 2003 Image From a RIS Server 43
■
Dir_name is the directory where the RIS image installed.
■
Arch is either i386 or amd64 for the 32-bit or 64-bit images respectively.
Separate installation procedures are provided for 32-bit and 64-bit Windows 2003
Server systems.
■
“Configuring a RIS Image for a Windows Server 2003 SP2 32-bit System” on
page 43
■
“Configuring a RIS Image for a Windows Server 2003 SP2 64-bit System” on
page 50
Configuring a RIS Image for a Windows Server
2003 SP2 32-bit System
Use this procedure for the 32-bit Windows Server 2003 SP2 operating system.
▼
To Configure a RIS Image for a Windows Server 2003
SP2 32-bit System
1. Install RIS support on a system that is running the Windows Server 2003
operating system.
Note – Before you can create a RIS image of the Windows Server 2003 SP2 operating
system, you must install RIS support on a system that is running the Windows
Server 2003 operating system.
For a complete set of instructions on how to install RIS support on Windows
Server 2003, go to
http://support.microsoft.com/kb/325862/en-us
.
2. To create an image of Windows Server 2003 SP2 on the RIS server, perform the
following steps:
a. Insert the Windows Server 2003 SP2 32-bit CD-ROM into the RIS server CD
drive.
b. From the Start menu choose Run.
c. Type
risetup.exe
in the Run field.
The Welcome to the Remote Installation Services Setup Wizard screen appears.
d. Click Next.
e. Select Add a new OS image to this remote installation server, and click Next.