Sun Microsystems Sun Blade X6440 s, Installation Manual

Page: 58 / 68

50 Sun Blade X6440 Server Module Windows Operating System Installation Guide • June 2008
8. To stop and start the Remote Installation Service (BINLSVC) on the RIS server,
type the following at the command prompt:
net Stop binlsvc
net Start binlsvc
9. Install the RIS image on to the Sun Blade X6440 server module.
For instructions on installing the RIS image on to the Sun Blade X6440 server
module, see
“Installing the RIS Image on a Client System” on page 57 .
Configuring a RIS Image for a Windows Server
2003 SP2 64-bit System
Use this procedure for the 64-bit Windows Server 2003 SP2 operating system.
▼
To Configure a RIS Image for a Windows Server 2003
SP2 64-bit System
1. Install RIS support on a system that is running the Windows Server 2003
operating system.
Note – Before you can create a RIS image of the Windows Server 2003 SP2 operating
system, you must install RIS support on a system that is running the Windows
Server 2003 operating system.
For a complete set of instructions on how to install RIS on Windows Server 2003,
go to
http://support.microsoft.com/kb/325862/en-us
.
2. To create an image of the Windows Server 2003 SP2 on the RIS server, perform
the following steps:
a. Insert the Windows Server 2003 SP2 64-bit CD-ROM into the RIS server CD
drive.
b. From the Start menu choose Run.
c. Type
risetup.exe
in the Run field.
The Welcome to the Remote Installation Services Setup Wizard screen appears.
d. Click Next.
e. Select Add a new OS image to this remote installation server, and click Next.