Sun Microsystems StorageTek 5320, Getting Started Manual

Page: 25 / 226

Chapter 1 System Overview 5
Note – The software serial number, located on a printed label at the front of the
server, identifies a matched pair (“-H1” or “-H2”) of Sun StorageTek 5320 NAS
single head and cluster appliance servers.
In the Sun StorageTek 5320 NAS Appliance configuration, the server can contain one
or two dual port FC host bus adapter (HBA) cards in PCI slot 1 (standard) and PCI
slot 0 and other options (see
“Server Options for All Configurations” on page 6 ).
FIGURE 1-2
shows the back of the server.
FIGURE 1-2
Sun StorageTek 5320 NAS Appliance Back Panel With Single HBA Card
Sun StorageTek 5320 NAS Cluster Appliance
In the Sun StorageTek 5320 NAS Cluster Appliance configuration, two high-
availability (HA) servers are sold as a matched pair and are identified as server
“-H1” and server “-H2” in their software serial numbers. Each server contains two
dual port FC HBA cards and can contain other optional cards (see
“Server Options
for All Configurations” on page 6 ).
FIGURE 1-3
shows the back of the server with two
HBA cards.
UPS
Four RJ-45
NICs (to LAN)
Optional cards
FC HBA 1
Sun service only
adapter
Status LEDs