Sun Microsystems SPARC Series, Service Manual

Page: 47 / 192

Chapter 3 Troubleshooting 3-9
3.4.2 Monitoring Output
To understand error conditions, collect monitoring output information. For the
collection of the information, use the commands shown in
TABLE 3-4
.
Nov 1 16:30:20 dt88-292 Refer to
http://sun.com/msg/SUN4-8000-0Y for more
information. WEB SITE: Where to find specific information and
actions for this error
Nov 1 16:30:20 dt88-292 AUTO-RESPONSE:One or
more device instances may be disabled. AUTO-RESPONSE: What, if anything, the system did
to alleviate any follow-on problems
Nov 1 16:30:20 dt88-292 IMPACT:Loss of services
provided by the device instances associated with this
fault. IMPACT: A description of what is considered to be the
impact of the fault
Nov 1 16:30:20 dt88-292 REC-ACTION:Schedule a
repair procedure to replace the affected device.Use
Nov 1 16:30:20 dt88-292 fmdump -v -u EVENT_ID to
identify the device or contact Sun for support. REC-ACTION: A brief description of the corrective
action the system administrator should take
TABLE 3-4
XSCF Commands for Checking Monitoring Output
Command Operand Description
showlogs
(XSCF
command)
console
Displays the console of a domain.
monitor
Logs messages that are displayed in the message window.
panic
Logs output to the console during a panic.
ipl
Collects console data generated during the period of the power-on of a
domain to the completion of the Solaris OS start.
TABLE 3-3
Predictive Self-Healing Messages (Continued)
Output displayed Description