Sun Microsystems PGX32, Installation Manual

Page: 29 / 48

13
C H A P T E R
3
Configuring the PGX32 Screen
After installation, you can configure the X Window screen resolution,
bit-depth, and refresh rate for your monitor. (This resolution is independent of the
console resolution described in Appendix A.) You can accept the default resolution
and skip this chapter.
You can use the configuration menu-style interface utility any time after installation
to change screen resolutions. See the
GFXconfig
(unbundled) or
pgxconfig
(bundled) manual pages for detailed descriptions.
Interactive Configuration
●
To configure your PGX32 card, as superuser, use either the
GFXconfig
or
pgxconfig
command.
For example, use
pgxconfig
if the PGX32 software is bundled with Solaris:
The PGX32 configuration window is displayed (
FIGURE 3-1
).
# pgxconfig -i