Sun Microsystems Netra t1 100, User And Administration Manual

Page: 141 / 154

Appendix B Installing a PCI Card 119
3. If the system already contains a PCI card, unclip the slide retainer from the edge
of the card (see
FIGURE B-2
).
FIGURE B-2
Unclipping the Slide Retainer
4. Remove the mid baffle. To do this:
a. Remove the screw at the rear of the unit and push the mid baffle towards the
drive bays (see
FIGURE B-2
).
FIGURE 11-1
Removing the Rear Screw and Pushing the Mid Baffle Towards the Front
Slide retainer
Mid baffle
SysAdmin.book Page 119 Friday, March 30, 2001 2:38 PM