Sun Microsystems Netra t1 100, User And Administration Manual

Page: 135 / 154

Appendix A Installing Additional Memory 113
7. Carefully transport the memory boards (boards B and C) with spacers onto
memory board A (see
FIGURE A-12
).
Follow the procedure described in Step 5 to mount the assembled Boards B and C
(with spacers inserted) onto memory Board A.
Hold the spacers, if necessary, so that they do not move out of position.
FIGURE A-12
Mounting the Second and Third Boards onto the Base Memory Board
8. Align the connectors of Board D to the sockets of Board C, but do not press down
yet to seat Board D (see
FIGURE A-13
).
Board B
Board C
Board A
SysAdmin.book Page 113 Friday, March 30, 2001 2:38 PM