Sun Microsystems Netra 240, Service Manual

Page: 98 / 154

80 Netra 240 Server Service Manual • June 2004
a. Pull up on the handle for the PCI card support and slide the support clear of
the PCI card (
FIGURE 5-7
).
FIGURE 5-7
Removing and Installing the Lower Full-Length PCI Card
b. Unseat the PCI card from the connector and lift it out of the server (
FIGURE 5-7
).
Installing a PCI Card
1. Prepare the server for servicing, if you have not done so already:
a. Power off the server.
See “Powering Off the Server” on page 22 .
b. Remove the server cover.
See “Removing the Server Cover” on page 27 .
c. Open the rotating service module.
See “Opening the Rotating Service Module” on page 30 .
Lower full-length card
PCI card support
Handle