Chapter 3
Establish Communication With ILOM Server Module SP
35
3. Press Enter to establish a connection between the serial console and the SP
interface.
After a few moments, the ILOM Login prompt appears.
For example:
<
host name
> Login:
4. Log in to ILOM as an Administrator by entering an Administrator user name
and password then press Enter.
Note –
You can log in to ILOM using the preconfigured Administrator account
shipped with ILOM: Login =
root;
Password =
changeme
.
The default prompt appears (->) and the system is ready for you to run the CLI
commands to establish network settings.
5. Type the following command to set the working directory:
cd /SP/network
6. Use the following CLI commands to specify the IP, NetMask, and Gateway
addresses. Note that the last command in the table below (
commitpending=
true
) must be performed last.
