18
Sun Blade X8400 Server Module Installation Guide • March 2008
▼
Install HDD Into the Server Module
1. Install the Sun Blade server module into a vacant chassis slot.
For details, see
“Install the Server Module Into the Chassis” on page 20
.
2. Locate and unpack the new HDD from its antistatic container.
3. Locate the vacant HDD slot on the server module.
Note –
If you are installing a single configuration HDD that has a factory-installed
version of the Solaris 10 Operating System, you must install that factory-installed
Solaris HDD in Slot 0 (labeled HDD0). All factory-installed Solaris HDDs are
preconfigured as disk 0.
4. On the new HDD, push the disk drive ejector lever button on the front to
unlatch the lever, then tilt down the lever.
5. Align the HDD with the vacant HDD slot in the server module. Ensure that the
ejector lever is completely open.
