-> show /SYS/MB
Targets:
BIOS
CPLD
NET0
P0
T_AMB_FRONT
T_AMB_REAR
Properties:
type = Motherboard
ipmi_name = MB
fru_name = ASSY,BLADE,X6275 M2 10GB
fru_part_number = 542-0162-01
fru_serial_number = 0328MSL-1030BW001F
fru_extra_1 = 03 X6275M2-10Gb
fault_state = OK
clear_fault_action = (none)
Commands:
cd
set
show
For detailed information, refer to the Oracle ILOM 3.0 documentation.
See Also
■
“Obtaining the ILOM IP Address” on page 33
■
■
“Configuring an ILOM IP Address” on page 41
Obtaining the ILOM IP Address
This topic describes ways to obtain a node's ILOM SP IP address. Although you can access each
node ILOM over the network through the CMM ILOM, in order to access the node ILOM over
the network directly, you need the SP IP address for the node. Choose a method of obtaining a
node SP IP address:
■
“How to Display the ILOM IP Address Using the Web Interface” on page 33
■
“How to Display the ILOM IP Address Using the CLI” on page 36
▼
How to Display the ILOM IP Address Using the Web Interface
You need to use the chassis CMM ILOM to display the network configuration for the ILOM
service processor of each server node, including its IP address. This procedure also verifies that
a node's ILOM is working correctly and that you can access it through the CMM ILOM.
The chassis CMM should already be connected to the network using its Ethernet management
port, configured and operational. If not, refer to your chassis documentation before proceeding.
Before You Begin
Obtaining the ILOM IP Address
33
