Page 5
Issue: 09.2002
I
NSTALLING
THE
LIGHTING
SET
Note
Try to keep the same power cable
location when fitting.You can, however,
positions depending on the surroundings.
4.3 Adapting the lighting set to the
sunshade
➭
Insert the adapter and fitting into the cable
seat.
➭
Align the adapter and fitting so that the
lighting set power supply cable is pointing
towards the stand tube.
Fixing the lighting set fitting to the adapter:
➭
Align the fitting peg with the groove in the adapter.
➭
Press the fitting as far as the adapter stop against
the spring pressure.
➭
Fix the fitting by turning in a clockwise direction.
Adapter
Fitting
1. press in
2. turn
Peg
Groove
1. press in
2. turn
Adapter
Fitting
3. pull downwards
Fitting
Centrepiece
with cable seat
Power supply cable
towards stand tube
Sliding
tube
Stand tube
➭
Remove the fitting from the adapter as
follows,
WITHOUT
changing the position
of the adapter.
1. Press the fitting lightly into the adapter.
2. Loosen the fitting by turning anticlockwise
and pull downwards out of the adapter.
Important
Ensure that the adapter position is not
changed when removing the fitting.
Fitting
1. press in lightly
2. turn and pull
downwards
Adapter
➭
Mark the drill holes in the adapter on the
Centrepiece.
mark the drill holes on the
Centrepiece
Removing the lighting fittings from the adapter:
➭
Press the fitting lightly into the adapter.
➭
Loosen the fitting by turning anticlockwise and pull out
downwards from the adapter.
➭
Remove fixing screws from the adapter.
Removing fixing screws
Centrepiece
with cable seat
