Installation
1: Check and make sure the unit is not damaged in any way before beginning installation.
2: Turn off all PV solar power and AC grid power then test to confirm isolation before installing.
3: Attach the unit securely in place using adequate fixtures.
4: Connect the M14 plug to the hot water tank then connect MC4 plugs to the PV solar panels.
5: Turn on the PV solar power and commence operating and inspection.
Working temperature:
-
10
-
50
℃
Storage temperature:
-
40
-
70
℃
Relative Humidity:
0%
-
100%
Required wire size & circuit breaker
4 to 6mm wire on PV solar input.
2.5 to 4mm wire to connect to the hot water tank.
10 to 20amp DC circuit breaker on PV solar input.
SUN FLUX II
Hot Water Controller
Model SEI 02
USER
MANUAL