WARNING!
Before using the equipment/installing, you need to read all
safety
instructions
.
General Safety Precautions
1: Be sure to read all instructions thoroughly. Installation must be carried out by a licenced
electrician following all relevant AS/NZS standards and local regulations of your state/territory
or country on installing this equipment. Failure to do so may result in death, fire or electric shock
and all warranty will be void.
2:
This unit is designed for indoor & outdoor use with a IP65 design.
3:
To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition
and that the wiring is not undersized. Do not operate the unit with damaged or substandard
wiring.
4:
Do not operate the unit if it has received a sharp blow, been dropped, or otherwise damaged in
any way.
Sun Flux II Hot Water Controller works with
*All types of PV solar panels.
*All types of electric hot water tanks.
*All types of AC elements and thermostats.
SUN FLUX II
Hot Water Controller
Model SEI 02
USER
MANUAL