3
MATERIAL
Your paddleboard is manufactured from High Density Polyethylene (HDPE). It is a very durable material. Our specially formulated
HDPE has an ultra-violet inhibitor blended throughout the material to reduce color fade and maintain its strength. Polyethylene is a
somewhat flexible material with some memory. This means it has a tendency to return to its original molded shape if distorted. Your
paddleboard is equipped with foam for flotation.
BOAT SET-UP
Fin
To install, follow instructions included with fin kit.
Drain Plug
Make sure drain plug is secure.
Manufacturers Statement of Origin (MSO)
You should receive a MSO with your new paddleboard. Some states may require a MSO for proper registration of your paddleboard.
Please check with your local licensing bureau.
APPLYING REGISTRATION DECALS
Before applying registration decals (if required), clean the area with alcohol or any solvent that does not leave a residue. Make sure
the solvent is put aside and the decal area is dry. Using a propane torch, lightly pass the flame back and forth over the area where
the decals will be applied. Don’t try to heat the surface. This procedure will enhance the adhesion of the decals.
