35 |
P a g e
5.2.9
Depth Wheel
Depth wheels come in a variety of different forms, but generally work either on
a simple pin or top link system.
For Pin Systems, simply remove the pin, raise
and lower the depth wheel to the desire
specification and reinsert the pin. Ensure any
lynch pins are in place so that the pin cannot
slip out during use.
Pin
Note: This is only an example system intended
for indication purposes only, and may not
exactly visually match your machine.
For Top Link Systems, simply loosen locking
plate on both sides of main body, wind main
body until desired distance is achieved, then
tighten locking plates back onto main body.
Top Link
5.2.10
Soil Retention Disc
Soil retention discs can be adjusted by relocating the
bearing bracket into one of the other pre-set hole
positions via two bolts. It is advised that the Nylock nuts
are replaced after loosening.
5.2.11
4-Way Control Box
The 4-Way Control Box is an easy system with 4 control settings. Simply flip the
black toggle up or down to turn the box on or off, then press the colour button
that represents the system you wish to use. Note; This system is only available
on select machines.