7
9. Using the supplied Hoist, raise one of the A-Frames. It does not matter which side raises first.
10. Continue using hoist until either the Cross Beam is fully seated in the A-Frame Saddle or until the unit has
reached a position that allows for easy manual positioning of the A-Frame assembly as shown below.
11. When the Cross Beam is firmly seated in the A-
Frame Saddle, lock both casters by setting the
rolling brake.
12. Using a ladder, place two bolts through the A-
Frame and Cross Beam using washers on both
sides. Tighten all three bolts to that the connec-
tion is secure.
CAUTION
Be certain both casters A-Frame are
locked before erecting
13. Reposition hooks on the Chain Set to the inner
most hooks.
14. Using Hoist, raise second A-Frame and secure in
the same manner as described above.
15. After bolting the Cross Beam to both A-Frames,
ensuring that all bolts are tight, remove Chain
Sets and Hoist and place in carrying bag for stor-
age.
Summary of Contents for GH5T
Page 2: ......
