O
PERATION
Hi-Low Lever
1. Neutral Position: Lever in the middle notch.
This lever is used to change the low speed into high speed or
vice versa when tractor is moving. It is used in combination
with the main shift lever to set the tractors travel speed.
3. Slow Speed: Move the lever out of notch and shift the
lever towards the front of the tractor.
Speed Selection:
2. High Speed: Move the lever out of the notch and shift the
lever towards the back of the tractor.
Note: Select the speed after starting tractor as required.
Hi-Low Lever
Parking
Brake Lever
A
Always engage the parking brake when the tractor is
used for work at a standstill, even if only for brief
periods of time.
The parking brake is located below operator’s seat and
engaged by the parking brake lever which acts on the
brake discs by means of a mechanical control.
- Press sleeve (A)
in forward direction, push the parking
brake lever downward and release the sleeve ‘A’.
- Pull the parking brake lever upward to operate the
parking brake.
Parking brake engagement
Parking brake disengagement
Parking Brake
IMPORTANT :
Driving the tractor with the parking brake
partially engaged will cause damage to internal brake
components.
WARNING
Always engage the hand brake when the tractor is used for
work at a standstill, even if only for brief periods of time.
Service Brake
The service brake pedal located to left hand side of the
platform.
Service Brake
40-11
Summary of Contents for TX25H
