11
To Remove a Sliding Shelf
1. Remove all bottles from the shelf.
2. Pull the shelf out as far as it will go.
3. Adjust the lever on each side of the shelf, as shown below (down on the left, up
on the right) and at the same time, pull the shelf out completely.
To raise or lower the position of the shelf, push up the sliding rails, making the
front hook out of the shelf bracket, then pull the sliding rails outward to detach
them from the shelf bracket. Reverse these steps to install rails in new location.
Replacement of the LED Light
Replacing the LED requires a qualified technician. First unscrew the 2 screws on
the light cover, then remove the screw on the LED panel, and replace the light
with one having the same specifications.
Power Failure
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If power is going to be off for a longer period of time, you need to take
the proper steps to protect the contents of your wine cooler.
Vacation Time
Leave the wine cooler operating during vacations of less than three weeks. For
periods longer than this, turn the wine cooler off and leave the door slightly ajar to
prevent odor from building inside the appliance.
Transporting your Wine Cooler
If you need to move your wine cooler once the box has been discarded:
1. Securely tape down all loose items (shelves) inside your appliance.
2. Turn the adjustable legs up to the base to avoid damage.
Summary of Contents for SWC532LBIST
Page 15: ...14 NOTES...
