5
3. The temperature setting can be adjusted from 2
℃
to 20
℃
(36°F to 68°F).
NOTE: To save energy and prolong the working life of the compressor, we advise you not
to set both zones at or below 5
℃ (41
°F) at the same time.
4. To view the “set” temperature at any time, press either button
or
once and the “set”
temperature for that compartment will flash in the LED display for 5 seconds.
RUN
Indicator light illuminates to signify the cooling mode is currently in operation.
LIGHT/LOCK
You can turn the interior light ON or OFF by pushing the button marked with the “bulb” symbol. The
light will turn off automatically if it remains ON for 10 minutes. Pushing the button marked with the
“bulb” symbol again will turn the light back on. For optimum storage of wine, keep the light off except
when viewing.
LIGHT/LOCK
Press and hold the "LIGHT/LOCK" button for 3 seconds. The control panel will lock and can not be
operated again until the button is pressed again. After that, it will operate normally.
Temperature Conversion
This unit has the option to display temperatures in either Celsius or Fahrenheit. To change the setting,
press and hold both buttons (
and
) simultaneously for approximately 3 seconds.
NOTES:
•
If the unit is unplugged, turned off or if there is a power failure, you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the Wine Cooler will not work.
•
When you use the appliance for the first time, or restart the appliance after it's been shut off for a
long time, there could be a few degrees difference between the temperature you select and the
one indicated on the LED readout. This is normal and is due to the length of the inactivation time.
Once the appliance has been running for a few hours, everything should be back to normal.
