INSTRUCTIONS FOR USE
Preparation before using
Press the ON/OFF key to turn the power on. A buzzer will beep once to indicate that the
cooktop has entered standby status.
Center the pot on the heating zone you will be using.
Operating Instructions
After the ON/OFF key has been pressed, all the indicators will show
“
–
”. Press the key for
the heating zone you will be using; the corresponding power level indicator will start to
flash. Press the
“
+
” or “
–
” button; the indicator will display
0
and flash for 5 seconds. Adjust
the power level from
0
through
9
using the
“
+
” or “
–
” button. After you adjust the power
level, the corresponding power level indicator will flash for 5 seconds. At this point, if you
want to adjust the power level again, just press the relevant zone selection and adjust the
power level when the corresponding power level indicator begins to flash.
See the table on the following page for the maximum power associated with each heating
zone.
Note:
After the ON/OFF key is pressed, the cooktop will remain in its standby state if no
other operation is carried out within one minute.
Timing function:
Press the TIMER key. The indicator flashes, and at this point, you can set the time. Using
the
“
+
” and “
-
“ keys, you can set the time from 1 to 99 minutes. When the “
+
” key is
pressed, the set time will increase by 1 minute; when the
“
-
“ key is pressed, the set time
will decrease by 1 minute. If the set time exceeds 99 minutes, it will reset to 0
automatically.
Timing confirmation:
1. Pressing the TIMER button continuously, you can set the time from cooking zone 1 to
cooking zone 4 sequentially as the relevant zone timing indicator flashes.
2. Once the timing indicator flashes for 5 seconds, the set time will be automatically
confirmed.